002246 ランダム
 ホーム | 日記 | プロフィール 【フォローする】 【ログイン】

Jimxiaoのブログ

【毎日開催】
15記事にいいね!で1ポイント
10秒滞在
いいね! --/--
おめでとうございます!
ミッションを達成しました。
※「ポイントを獲得する」ボタンを押すと広告が表示されます。
x

PR

プロフィール

Jimxiao

Jimxiao

カレンダー

バックナンバー

2024.04
2024.03
2024.02
2024.01
2023.12

カテゴリ

日記/記事の投稿

コメント新着

コメントに書き込みはありません。

キーワードサーチ

▼キーワード検索

2023.04.06
XML
カテゴリ:カテゴリ未分類
Among the post-treatment equipment of an air compressor, there are mainly storage tanks, dryers and filters. Dry compressed air ensures that the air compressor air system and the production process operate without hindrance. The role of the dryer is to eliminate condensate in the compressed air and to ensure the discharge of dry and clean compressed air. After being equipped with the relevant dryer, but the compressed air still contains water, which is due to these points.
1, the air around the air compressor station humidity
The air itself has humidity and contains certain moisture. When the air is compressed, due to the high temperature inside the compressor, the moisture evaporates directly to form water vapor and then discharges from the compressor with the pressure, and when it is shut down, the temperature drops, which causes the water vapor to form condensate. Therefore, the humidity of the working environment of the air compressor should be low; or this condensate should be discharged before starting to use the machine.
2, post-treatment drying equipment failure
The general drying post-treatment capacity of the cold dryer is the pressure dew point 3℃, if your work site temperature is lower than 3℃, there is bound to be water. At this time, it is recommended to configure micro-thermal suction dryer post-processing drying equipment, the pressure dew point can reach -20 ℃ does not produce which carries water.
3, air compressor configuration of the post-processing drying equipment capacity is not enough
Generally speaking, the post-treatment drying volume configured by the manufacturer for the user is configured according to the average gas consumption, if your instantaneous gas consumption is larger, it will cause the capacity of the post-treatment drying equipment to be insufficient, resulting in water in the gas.
4, the gas storage tank itself has the function of water accumulation
It contains a lot of water that is not drained out and forget to drain. Regularly open the drain valve under the gas storage tank to drain the water.

lingyu dryer






お気に入りの記事を「いいね!」で応援しよう

最終更新日  2023.04.06 18:07:15
コメント(0) | コメントを書く



© Rakuten Group, Inc.